Error code · Range

Frigidaire Range Code F94: Too Many Door Lock Attempts

Medium · inspection needed

Code: F94
Appliance: Range
Brand: Frigidaire
Warranty: 30-day workmanship

What F94 means

On Frigidaire freestanding gas and electric ranges from the 2004 generation on, such as the PLEF398DC and GLEF378DS, F94 appears once the control has tried to lock the oven door more times than it allows. Each attempt is counted, and when the count runs out the control gives up and displays F94 so it does not keep driving the latch. Slide-in ranges group F94 and F95 together as door-latch codes. A self-clean that will not start is the usual sign.

Common causes of F94

The latch motor that repeatedly fails to finish a lock
The latch switch
Wiring to the latch
Door alignment

✓ One safe check you can try

1. Close the door fully and make sure nothing blocks it. 2. Power the range down at the plug or breaker for up to 30 seconds, then power it up. 3. Try a short bake and see whether the code returns. 4. Keep your hands off the latch, since forcing it can cause more damage.

! Why to stop there

F94 is a tally of tries, so we look for whatever keeps each lock from finishing.
The latch motor, its switch and the way the door is aligned are tested one at a time.
You receive a written price first, and an honest opinion on whether repairing an older range is a sensible choice.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

F93Frigidaire Range F93: Door Lock Took Too Long F95Frigidaire Slide-In Range F95: Door Motor Will Not Stop LockFrigidaire Oven Message "Lock": Oven Lock Is On Sb (showroom)Frigidaire Range Code Sb: Showroom Mode F90Frigidaire Range F90 Error: Door Unlock Took Too Long F91F91 on a Frigidaire Range: Too Many Unlock Attempts F92Frigidaire Range Code F92: Oven Door Left Open Too Long F64Frigidaire Range Code F64: Power Frequency Not Detected

F94F94 questions

Does F94 point to the door or to the control?

It points to the latch and the door first. A latch that cannot finish a lock is the common reason the count runs out, so we test it before we judge the control.

May I go on baking when F94 is on the display?

Often the oven can bake without its lock, but that depends on the model. We would test it, and we would hold off on a clean cycle until the latch has been looked at.

Can an older range with F94 be repaired?

Yes. Before we start, you hear plainly whether the repair is worth it, and you see a written price, so you know what to expect from us.

Book a visit

Still seeing F94?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 844-8518