Error code · Range

Frigidaire Oven Message “Lock”: Oven Lock Is On

Low risk · DIY check OK

Code: Lock
Appliance: Range
Brand: Frigidaire
Warranty: 30-day workmanship

What Lock means

On Frigidaire ranges and wall ovens with a self-clean latch, such as the FFEF3054TS and FGET3065PF, the word Lock on the display means the Oven Lock feature is active. The door locked indicator flashes, and the oven will not start while the lock is on. It is a setting you or someone else turned on, and it also appears during self-clean. It is not an error.

Common causes of Lock

The Oven Lock setting turned on by a key press
A self-clean cycle in progress or just finished
A control that does not release the lock
The latch if the indicator keeps flashing

✓ One safe check you can try

1. Press OFF and hold it for 6 seconds. 2. Wait for the word Lock to leave the display. 3. Check whether a self-clean cycle is still running, since the oven stays locked then. 4. Do not pull on the door while the indicator flashes.

! Why to stop there

If Lock stays after the hold, the question is the keys or the latch.
We test the keys and the latch.
A written price comes first.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

F93Frigidaire Range F93: Door Lock Took Too Long F94Frigidaire Range Code F94: Too Many Door Lock Attempts F95Frigidaire Slide-In Range F95: Door Motor Will Not Stop Sb (showroom)Frigidaire Range Code Sb: Showroom Mode F66Frigidaire Range Code F66: Control Power Supply Failure F68 / F69Frigidaire Range Codes F68 and F69: High Voltage at the Range F7 10 / 20 / 30 / 40Frigidaire Electric Range F7 10, 20, 30 and 40: Open Surface Knob Circuit F7 11 / 21 / 31 / 41Frigidaire Range Codes F7 11, 21, 31 and 41: Shorted Surface Knob Circuit

LockLock questions

Is Lock a problem?

No. It means the Oven Lock is on. Holding OFF for 6 seconds cancels it on these models, and the oven can then be used as usual.

Why does the indicator flash with Lock?

The door locked indicator flashes while the lock is active or the latch is moving. That is normal during self-clean, and it is not a sign that anything is wrong.

What if holding OFF does not cancel Lock?

Then we test the keys and the latch. We tell you plainly what we find before any repair, and you get a written price first.

Book a visit

Still unsure about Lock?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 844-8518