Error code · Range

F7 12, 22, 32 and 42 on a Frigidaire Range: Surface Knob Wrong Value

Medium · inspection needed

Code: F7 12 / 22 / 32 / 42
Appliance: Range
Brand: Frigidaire
Warranty: 30-day workmanship

What F7 12 / 22 / 32 / 42 means

On Frigidaire freestanding electric ranges with the ESEC 10R surface element control, such as the PLEF398DC, F7 followed by 12, 22, 32 or 42 means one surface element's potentiometer is reading a value the control does not expect. The knob is neither open nor shorted, but its reading is wrong. The tens digit names the element, left front to right front. You may see that burner act erratically, or not respond at all.

Common causes of F7 12 / 22 / 32 / 42

The potentiometer behind that knob, which can wear
The wiring and connectors for that element
The interface board input for that knob

✓ One safe check you can try

1. Turn the elements off. 2. Note which burner was in use when the code appeared. 3. Power the range off at the plug or breaker for a short time, then restore it. 4. Leave the knob alone, and test the other burners one by one to see whether they respond.

! Why to stop there

A wrong value can come from wear, a loose connector or the board input, so we test all three.
We check that knob against the others on the range.
You see a written price first, and hear it plainly if the age of the range makes the repair not worth it.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

F93Frigidaire Range F93: Door Lock Took Too Long F94Frigidaire Range Code F94: Too Many Door Lock Attempts F95Frigidaire Slide-In Range F95: Door Motor Will Not Stop LockFrigidaire Oven Message "Lock": Oven Lock Is On Sb (showroom)Frigidaire Range Code Sb: Showroom Mode F9 (old)Older Frigidaire Range F9 Code: Door Latch Motor Problem F90Frigidaire Range F90 Error: Door Unlock Took Too Long F91F91 on a Frigidaire Range: Too Many Unlock Attempts

F7 12 / 22 / 32 / 42F7 12 / 22 / 32 / 42 questions

What does a wrong value mean?

The knob's reading falls outside the range the control expects, but it is not fully open or shorted. We compare it to the other knobs on the range to see how far off it is.

Can I use the other burners with F7 12?

Often yes, but we would test them. We would not use the affected burner until we have looked at it, since the control cannot read its setting reliably.

Is it worth fixing an older range with F7 22?

Usually, since a knob or connector is a smaller repair. We tell you if a board makes it not worth it, and you see a written price before any work.

Book a visit

Still seeing F7 12 / 22 / 32 / 42?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 844-8518