Error code · Range

Frigidaire Range F60 Error: Oven Control Running Hot

High · stop use, call now

Code: F60
Appliance: Range
Brand: Frigidaire
Warranty: 30-day workmanship

What F60 means

On Frigidaire ranges with later electronic oven controls, F60 means the temperature at the control itself is higher than it should be. The control sits behind the backguard, and it watches its own heat so it is not damaged. A range that cools poorly, a blocked vent or a stopped cooling fan can all push it over the limit. You will see F60 after a long oven run, and the range may shut the oven off until the control cools down.

Common causes of F60

The backguard and the vents around the control
The cooling fan that moves air over the control
Heat coming from a cooktop or oven that is working too hard
The control's own temperature reading

✓ One safe check you can try

1. Turn the oven off and let the range cool. 2. Clear anything stacked against the backguard or covering its vents. 3. Briefly remove power at the plug or breaker, then bring it back. 4. Wait until the range is cool before you cook again.

! Why to stop there

F60 may show up only after long cooking, so the range can test fine when we arrive.
We check the vents, the cooling fan, and the heat the control sees under load.
A written price comes first, and we are straight about whether an older range merits the repair.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

F93Frigidaire Range F93: Door Lock Took Too Long F94Frigidaire Range Code F94: Too Many Door Lock Attempts F95Frigidaire Slide-In Range F95: Door Motor Will Not Stop LockFrigidaire Oven Message "Lock": Oven Lock Is On Sb (showroom)Frigidaire Range Code Sb: Showroom Mode F68 / F69Frigidaire Range Codes F68 and F69: High Voltage at the Range F7 10 / 20 / 30 / 40Frigidaire Electric Range F7 10, 20, 30 and 40: Open Surface Knob Circuit F7 11 / 21 / 31 / 41Frigidaire Range Codes F7 11, 21, 31 and 41: Shorted Surface Knob Circuit

F60F60 questions

Is F60 dangerous?

The control shut down to protect itself, so let the range cool first. If it shows F60 again without heavy use, call us and we will find out why the control is getting so hot.

Can blocking the vents cause F60?

Yes. Anything covering the backguard vents holds heat in around the control. Clearing them is the first thing worth trying, and it costs nothing, though a repeat code means we should look further.

Is the cooling fan always the reason for F60?

No. A fan, a blocked vent, or the control's own sensing can each be the cause, so we test all three before we recommend a part and give you a written price.

Book a visit

Still seeing F60?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 844-8518