Frigidaire Professional Dishwasher Code ER: Keypad Is Reporting a Failure
On Frigidaire Professional fully integrated direct-feed dishwashers from the mid-2000s, such as models PLD4555RFC0 and PLD4375RFC0, ER means the control has found a membrane switch failure. If any keypad pad stays pressed for a full minute,…
- Code
- ER (Er)
- Appliance
- Dishwasher
- Brand
- Frigidaire
- Warranty
- 30-day workmanship
What ER (Er) means
On Frigidaire Professional fully integrated direct-feed dishwashers from the mid-2000s, such as models PLD4555RFC0 and PLD4375RFC0, ER means the control has found a membrane switch failure. If any keypad pad stays pressed for a full minute, the control reports Er. The display may also alternate ER with CE, uo or uF. The dishwasher may not start while the keypad is reporting a stuck pad.
Common causes of ER (Er)
- A keypad pad that is stuck or shorted
- Moisture or damage on the membrane keypad
- The wiring from the keypad to the control
1. Close the door and make sure nothing is pressing the keypad. 2. Wipe the keypad with a dry cloth. 3. Press Cancel once and try a cycle. 4. If ER returns, stop using the dishwasher and call us. 5. Note whether ER shows alone or alternates with another message.
- The code means the control believes a pad is stuck, and only testing can tell whether the keypad or the control is the cause.
- We check the keypad and its connection first.
- This is an older model; we tell you if a new keypad would not be a good value.
Other Dishwasher codes
What is ER on a dishwasher?
ER means the control sensed a keypad pad closed for a full minute and reported a membrane switch failure. The keypad or its connection is the first place we look.
Can a damp keypad cause ER?
Yes. Moisture on the keypad can short pads and trigger the message. Dry the keypad and try again. If ER returns, the membrane may be damaged.
Why does ER sometimes alternate with CE?
Some units alternate several messages, which may point to more than one control issue. We read the sequence and test each one in order. Each message gets checked on its own.
Still seeing ER (Er)?
A technician diagnoses it on site and gives you the price in writing before any work starts.
