Error code · Dishwasher

Frigidaire Dishwasher Stuck in UL Test Mode

Low risk · DIY check OK

Code: UL
Appliance: Dishwasher
Brand: Frigidaire
Warranty: 30-day workmanship

What UL means

UL appears on Frigidaire Professional direct-feed dishwashers, such as PLD4555RFC0 and PLD4375RFC0, when the control has been programmed into a UL test mode. This is a testing state used to check the dishwasher, not a problem the control found. If you see UL, the dishwasher is waiting in or running a test and will not behave like a normal wash. These are older dishwashers that are still in many homes, and we repair them.

Common causes of UL

The control left in a test state after a button sequence
A stuck or sticking pad on the control panel
The control itself, if UL keeps returning

✓ One safe check you can try

1. Cancel any running cycle. 2. Open and close the door firmly, then wait a minute. 3. Press each control pad once, lightly, to check none feels stuck. 4. Start a normal cycle and see whether UL clears. 5. Leave the dishwasher unused until we visit if UL stays.

! Why to stop there

Your checks cannot tell us whether the test state was triggered by a stuck pad or by the control itself.
We check the pads and then the control, and we do not replace a board until we know it is the cause.
Our price is quoted in writing before we begin.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dishwasher codes

RE / RFFrigidaire Dishwasher Codes RE and RF: Rinse Aid Switch Readout SdFrigidaire Dishwasher Code Sd: Detergent Dispenser Activated ThFrigidaire Dishwasher Showing Th: A Thermistor Failure tuFrigidaire Dishwasher Code Tu: Turbidity Sensor Trouble UF (uF)Frigidaire Dishwasher Code uF: Vent Fan Not Running UO (uo / Uo)Why a Frigidaire Dishwasher Shows Uo and Will Not Start PFFrigidaire Dishwasher Code PF: Power Was Lost rAFrigidaire Professional Dishwasher Code rA: Switch in the Rinse Aid Dispenser

ULUL questions

Is UL an error code?

No. It is a test-mode message, so the control is in a testing state. It does not point to a failed part by itself. Nothing in a UL display points to a worn part.

Why will my dishwasher not start a normal wash?

In test mode the control is not set up for a normal cycle. We find out why it stayed there, then clear it. Pads that stick are common on older controls, which is why we start there.

Can you fix an older Professional dishwasher?

Yes. We repair these models and tell you plainly if a repair is not worth making. If a stuck pad is not the reason, we look at the control.

Book a visit

Still unsure about UL?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 844-8518