FCCS181Q
Frigidaire FCCS181Q Commercial Freezer Repair
Most common issues on this model
- Cabinet that stays above zero in warm weather
- Gasket that peels or has gaps at the corners
- Compressor that never seems to rest
- Lid that does not hold in the open position
FCCS181Q is a 17.5 cu. ft. food service grade chest freezer in white that also appears as FCCS181QW. It is a mid-large older model and a common sight in restaurant back rooms, concession trailers and big home garages.
In Houston heat a chest freezer in a garage or storage room loses efficiency, so we check the room temperature, the airflow around the cabinet and the condenser. The gasket is next: corners are where gaps appear first. If the compressor runs without a break, we test the thermostat and the start parts and look at how often the lid is being opened.
A mid-size chest freezer still deserves the right part, so we read the plate under the lid or on the rear panel first. Quotes are written, and the repair has a 30-day warranty.
Key features
- 17.5 cu. ft. chest freezer
- Food service grade
- White finish
- Also sold as FCCS181QW
Error codes this model can show
My freezer struggles in summer. Is that normal?
A chest freezer in a hot garage works harder, but it should still reach its set temperature. If it cannot, we check the condenser, the seal and the thermostat.
Where do gasket gaps usually show up?
At the corners of the lid, where the seal bends most. We check with a thin paper strip and replace the gasket when it does not grip.
Can I keep food inside while you diagnose it?
Usually yes for a short check, but we tell you if the cabinet is too warm to be safe so you can move the food first.
Book repair for your FCCS181Q
Book online in about a minute, or give us a call. Same-day appointments are available inside the Loop on most days, and next-day service across the rest of Houston.