Booking today · Houston arrival windows 9–12 · 1–4 · 4–7 Independent Frigidaire specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 844-8518 Schedule a Repair
Error code · Dryer

Frigidaire Dryer Code EAF: Watchdog Reset

EAF means the microcontroller was reset by its internal watchdog timer on Frigidaire Affinity and Gallery 5.8 cubic foot electronic-control dryers, along with the older 5.75 cubic foot Good and Better models. The watchdog is a…

Medium · inspection needed
Schedule a Repair(713) 844-8518
Code
EAF
Appliance
Dryer
Brand
Frigidaire
Warranty
30-day workmanship

What EAF means

EAF means the microcontroller was reset by its internal watchdog timer on Frigidaire Affinity and Gallery 5.8 cubic foot electronic-control dryers, along with the older 5.75 cubic foot Good and Better models. The watchdog is a built-in monitor that restarts the control if it stops responding as expected, so EAF is a reset record and not a statement that the board has failed. You may see the dryer stop, restart or show EAF. Without a digital readout, the indicator lights flash it instead. These are older dryers still in many homes.

Common causes of EAF

  • A one-time reset caused by a power surge or dip
  • The electronic control if resets keep happening
  • Wiring or connector problems that interrupt the control's power
✓ One safe check you can try

1. Press Cancel to clear the code. 2. Unplug the dryer for a short time and plug it back in. 3. Check that the power cord is fully seated. 4. Restart the cycle. 5. If EAF comes back, call us to schedule service.

! Why to stop there
  • A reset that happens once does not show a board problem, so we do not recommend replacing the control right away.
  • If EAF recurs, we check the power supply and connections first and the board after.
  • We tell you plainly if the older dryer is not worth the repair.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Dryer codes

E8CWhen a Frigidaire Dryer Shows E8C: Safety Thermostat Tripping E9EFrigidaire Dryer Error E9E: Line Voltage Problem Beep-count codes (4 / 6 / 9 beeps)Frigidaire Affinity Dryer Beeps: 4, 6 and 9 Beep Codes E10-E12Frigidaire Dryer E10, E11 and E12 Codes: Control Memory Errors E24 / E25Frigidaire Dryer E24 or E25: Control Thermistor Open or Shorted E4AFrigidaire Dryer Code E4A: Drying Time Too Long E5BFrigidaire Dryer Code E5B: No Heat from the Heater E68A Stuck Key on a Frigidaire Dryer: Code E68
EAFEAF questions
Does EAF mean the control board is bad?

No. It records that the control restarted itself. The board is replaced only if EAF keeps coming back. A single reset is not a sign the board is worn out.

What can cause a watchdog reset?

A power dip or surge, a loose connection or a control that is starting to misbehave. We check the simple causes first. If EAF repeats, we check the power and connections first.

Is it worth repairing an older dryer with EAF?

If it comes back and the control is the cause, the repair is often reasonable. You will have the price in writing before work begins. We replace the control only when it is clearly the cause.

Book a visit

Still seeing EAF?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 844-8518
☎ Call our office ▤ Schedule a Repair