Error code · Washer

Frigidaire Front-Load Washer Code EF1: Clogged Drain Pump

Medium · inspection needed

Code: EF1
Appliance: Washer
Brand: Frigidaire
Warranty: 30-day workmanship

What EF1 means

EF1 on a Frigidaire front-load washer means the drain pump is clogged. The horizontal-axis electronic control, used from the 3.0 cu ft Frigidaire and Gallery washers to the Affinity 6000 and 7000, watches how fast the tub empties. If the pump cannot move water out, the cycle stops and EF1 appears. Owners often see water left in the tub, clothes still soaked and a washer that will not spin. Coins, socks, lint and hair clips are the usual things that block it. On models without a display, the same condition is shown as light flashes.

Common causes of EF1

Debris blocking the drain pump
Kinked or clogged drain hose
Standpipe or household drain backed up
Pump not turning

✓ One safe check you can try

1. Turn the washer off and unplug it. 2. Check the drain hose behind the washer for kinks. 3. Check that the household standpipe is not backed up. 4. Have the drain pump cleared of any blockage. If you are not comfortable, call us.

! Why to stop there

EF1 says the pump is clogged, but a kinked hose, a clogged standpipe or a failed pump can look the same.
We clear the pump and test the drain path, then give you a written price before any part is replaced.
Water in the drum is a mess, and we tell you how we will handle it.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

F2Frigidaire Washer Code F2: Too Much or Wrong Soap LED flash-count codes (non-display models)Frigidaire Gallery Washer Without a Display: Reading Codes from Blinking Lights LOCFrigidaire Front-Load Washer Display LOC: Control Lock Is on E98Frigidaire Affinity Washer Code E98: Panel Circuit Problem Detected EBEFrigidaire Affinity Washer Code EBE: Console Control Flag EBFFrigidaire Affinity Washer Code EBF: Console Control Warning EB1Frigidaire Front-Load Washer Code EB1: Power Frequency Out of Range EB2Frigidaire Front-Load Washer Code EB2: Line Voltage Above 130 Volts

EF1EF1 questions

Is there water left in the washer?

Often yes. EF1 means water did not leave the tub. We drain the tub safely before we clear the pump. We unplug the washer and drain it carefully first.

What usually blocks a drain pump?

Coins, socks, lint and small items. Clearing the pump fixes most EF1 codes. If the pump is not turning, it needs replacing. If the pump motor is not turning, it needs replacing, and we give you a written price first.

Can I clear it myself?

Some owners can reach the filter. If you are not sure, call us. We unplug the washer and handle the water. If you are not sure, call us, and we unplug the washer and handle the water.

Book a visit

Still seeing EF1?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 844-8518