Booking today · Houston arrival windows 9–12 · 1–4 · 4–7 Independent Frigidaire specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 844-8518 Schedule a Repair
Error code · Washer

Frigidaire Affinity Washer Code EBF: Console Control Warning

EBF is the last of the console control codes on Frigidaire Affinity 6000 and 7000 front-load washers. It applies to the 2006 washers and the 3.5 cu ft washers of about 2009 to 2012, not to…

Medium · inspection needed
Schedule a Repair(713) 844-8518
Code
EBF
Appliance
Washer
Brand
Frigidaire
Warranty
30-day workmanship

What EBF means

EBF is the last of the console control codes on Frigidaire Affinity 6000 and 7000 front-load washers. It applies to the 2006 washers and the 3.5 cu ft washers of about 2009 to 2012, not to the earlier 3.0 cu ft design. When EBF appears, the control has found a problem in the panel circuit. The washer may stop the cycle, ignore the keys or hold the code on the display. These washers are older, and we still see them in many Houston homes.

Common causes of EBF

  • Console board or processor
  • Connector between the console and the main control
  • Selector or key contacts
✓ One safe check you can try

1. Turn the washer off and wait a moment. 2. Turn it on and try a basic cycle. 3. Check that the panel is dry and clean. 4. If EBF returns, do not keep trying. Tell us at what point in the cycle it appeared when you call.

! Why to stop there
  • EBF names the panel circuit, not a part, so we have to test it to know more.
  • We check the connector, then the console, then the main board. You get the price in writing before any repair begins.
  • If the washer is old enough that a repair makes no sense, we will tell you so.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

F2Frigidaire Washer Code F2: Too Much or Wrong Soap LED flash-count codes (non-display models)Frigidaire Gallery Washer Without a Display: Reading Codes from Blinking Lights LOCFrigidaire Front-Load Washer Display LOC: Control Lock Is on E98Frigidaire Affinity Washer Code E98: Panel Circuit Problem Detected EBEFrigidaire Affinity Washer Code EBE: Console Control Flag EB1Frigidaire Front-Load Washer Code EB1: Power Frequency Out of Range EB2Frigidaire Front-Load Washer Code EB2: Line Voltage Above 130 Volts EB3Frigidaire Front-Load Washer Code EB3: Line Voltage Under 90 Volts
EBFEBF questions
Are EBE and EBF a pair?

They belong to the same console group. The difference is not explained in the owner materials, so we test the panel for both. The owner materials do not explain what separates the two, so we test the panel circuit for both.

Do I need to replace the whole panel?

Not always. A loose connector or a single circuit can be the cause. We confirm before ordering anything. A loose connector or a single bad circuit can be the cause, so we confirm what is wrong before ordering anything.

Are parts available for older Affinity washers?

Often, yes, but it depends on the model. We confirm the part and the price in writing first. We give you the price in writing first, and we say plainly if the washer is better replaced.

Book a visit

Still seeing EBF?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 844-8518
☎ Call our office ▤ Schedule a Repair