Booking today · Houston arrival windows 9–12 · 1–4 · 4–7 Independent Frigidaire specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 844-8518 Schedule a Repair
Error code · Washer

Frigidaire Top-Load Washer E4: Out of Balance During Spin

E4 on a Frigidaire top-load washer with a digital display means the washer is out of balance during the spin. The washer tries to correct the problem on its own, and if it cannot after three…

Medium · inspection needed
Schedule a Repair(713) 844-8518
Code
E4
Appliance
Washer
Brand
Frigidaire
Warranty
30-day workmanship

What E4 means

E4 on a Frigidaire top-load washer with a digital display means the washer is out of balance during the spin. The washer tries to correct the problem on its own, and if it cannot after three tries it stops and shows E4 so you can redistribute the clothes. A heavy single item, a load bunched to one side, a washer that is not level or foam shipping supports left in place can all cause it. You may notice thumping, a drum that shakes, or a wet load that stopped before spinning.

Common causes of E4

  • A load bunched to one side or one heavy item
  • A washer that is not level or not resting firmly
  • Foam shipping supports left in the base
  • A suspension problem that lets the tub swing
✓ One safe check you can try

1. Check that the washer rests firmly and adjust the leveling legs. 2. Confirm the foam shipping support was removed. 3. Open the lid and redistribute the load evenly. 4. Close the lid and restart the spin. 5. If the load is soaked, wring out heavy items by hand before restarting the spin.

! Why to stop there
  • If E4 keeps returning with an even load and a level washer, we do not know whether the suspension or the sensing is the cause.
  • We check the tub movement and the leveling.
  • We write the price down first, and the repair carries a 30-day workmanship warranty.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

F2Frigidaire Washer Code F2: Too Much or Wrong Soap LED flash-count codes (non-display models)Frigidaire Gallery Washer Without a Display: Reading Codes from Blinking Lights LOCFrigidaire Front-Load Washer Display LOC: Control Lock Is on E98Frigidaire Affinity Washer Code E98: Panel Circuit Problem Detected EBEFrigidaire Affinity Washer Code EBE: Console Control Flag EBFFrigidaire Affinity Washer Code EBF: Console Control Warning EB1Frigidaire Front-Load Washer Code EB1: Power Frequency Out of Range EB2Frigidaire Front-Load Washer Code EB2: Line Voltage Above 130 Volts
E4E4 questions
Why does my washer stop before it spins?

It senses the load is lopsided and tries to fix it. After three failed tries it stops and shows E4. Spreading the clothes usually clears it.

Should I wash a single heavy item alone?

A single heavy item such as a rug or a bath mat often leads to an uneven spin. Wash it with a few smaller pieces and leave room in the drum so the load can spread out.

What if E4 happens every load?

Check the level and the shipping supports first. If it still happens, call us and we look at the suspension. We repair older washers too.

Book a visit

Still seeing E4?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 844-8518
☎ Call our office ▤ Schedule a Repair