Error code · Range

Frigidaire Range Codes F7 11, 21, 31 and 41: Shorted Surface Knob Circuit

Medium · inspection needed

Code: F7 11 / 21 / 31 / 41
Appliance: Range
Brand: Frigidaire
Warranty: 30-day workmanship

What F7 11 / 21 / 31 / 41 means

On Frigidaire freestanding electric ranges with the ESEC 10R surface element control, such as the PLEF398DC, F7 followed by 11, 21, 31 or 41 means one surface element's potentiometer reads shorted. The tens digit names the element, left front through right front in that order. Moisture is a known cause, so a spill or heavy steam around the knobs can bring the code on. You will see that burner stop responding while the others may still work.

Common causes of F7 11 / 21 / 31 / 41

Moisture under the knob or in its connector
The potentiometer behind that knob
The wiring and interface board connection for that element

✓ One safe check you can try

1. Turn the elements off. 2. Dry the control area while the range is off, and move any spill away from the knobs. 3. Switch the power off at the plug or breaker for a short while, then on. 4. Do not pull off the knobs, and let us know which burner showed the code.

! Why to stop there

Moisture can clear by itself, so the first question is whether the code stays after the panel is dry.
We test the knob and wiring, then the interface board.
We give you a written price first, and we tell you plainly if an older range is not worth the repair.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

F95Frigidaire Slide-In Range F95: Door Motor Will Not Stop LockFrigidaire Oven Message "Lock": Oven Lock Is On Sb (showroom)Frigidaire Range Code Sb: Showroom Mode F93Frigidaire Range F93: Door Lock Took Too Long F94Frigidaire Range Code F94: Too Many Door Lock Attempts F64Frigidaire Range Code F64: Power Frequency Not Detected F65Frigidaire Range F65: Keyboard Short or Control Failure F66Frigidaire Range Code F66: Control Power Supply Failure

F7 11 / 21 / 31 / 41F7 11 / 21 / 31 / 41 questions

Can a spill cause F7 11?

Yes. The code can come from moisture getting into the knob circuit. Drying the area and resetting the power sometimes clears it, though a repeat means we should test the knob.

What separates F7 11 from F7 10?

F7 10 reads open and F7 11 reads shorted. Both name the left-front knob, but we test them differently, because a short and an open point to different causes.

Will you check the other knobs too?

Yes. A spill may have affected more than one knob circuit, and we check them while we are there, so you only need one visit to know where things stand.

Book a visit

Still seeing F7 11 / 21 / 31 / 41?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 844-8518