FARG4043M
Frigidaire Affinity FARG4043M Dryer Repair
Most common issues on this model
- Burner that clicks but stays dark
- Dryer that stops heating after the first few minutes
- Drum noise on every turn
- Clothes that smell scorched or musty after drying
The FARG4043M is a 7.0 cubic foot Affinity gas dryer in Classic White, with FARG4043MW as the sibling label. It is an older model that many homes still rely on, and we repair it where the numbers work.
Most gas dryer calls come down to ignition, airflow or the drum drive. A burner that clicks without lighting leads us to the igniter and valve coils, and heat that disappears after a few minutes leads us to the flame sensor and the thermal parts. A musty or scorched smell on clothes suggests the vent is holding moisture or heat, so we inspect the duct all the way to the outside wall.
We match the whole label, number and serial, with the parts list before ordering. The estimate is written, and our labor is guaranteed for 30 days.
Key features
- Affinity gas dryer
- 7.0 cu. ft. capacity
- Classic White finish
- Also sold as FARG4043MW
Error codes this model can show
Why does the dryer click but not light?
The igniter may be too weak to open the gas valve, or the valve coils may have failed. We test current through the igniter and resistance across the coils.
My clothes smell musty even after a full cycle. What is happening?
Moist air is probably staying in the drum because the vent is restricted. We clear the duct and check the exhaust flow, and then confirm the burner is giving normal heat.
What makes the drum thump on each turn?
A worn roller, a flat spot on the belt or a damaged glide. We turn the drum by hand to feel the rough spot and replace only the part that is worn.
Book repair for your FARG4043M
Book online in about a minute, or give us a call. Same-day appointments are available inside the Loop on most days, and next-day service across the rest of Houston.