FAQE7077K
Frigidaire FAQE7077K Electric Dryer Repair
Most common issues on this model
- Dryer that works for a few loads and then loses heat
- Burning or hot-metal smell near the drum
- Drum light or controls that act up
- Vent that feels weak at the outside wall
The FAQE7077K is an Affinity 7.0 cubic foot electric dryer in Classic Red. Revisions may be marked FAQE7077KA, FAQE7077KB or FAQE7077KN. Years later, plenty of these are still tumbling loads in laundry rooms and garages.
Dryers in a garage or an enclosed closet get less fresh air, which makes the venting and the thermal parts work harder. We measure the airflow at the outside wall first, then test the thermal fuse and the high-limit thermostat. A hot-metal smell makes us look at the heating element and the lint inside the heater box. Strange behavior in the controls sends us to the connectors and the board.
The number and serial on the data label go on our work order before we buy a part. We quote in writing before the repair, and the work is guaranteed for 30 days.
Key features
- Affinity electric dryer
- 7.0 cu. ft. drum
- Classic Red
- Other suffixes: KA, KB, KN
Error codes this model can show
Why does heat come and go from load to load?
A thermostat that is failing, a fuse that is near its limit or poor venting can all do it. We test the thermal parts and measure airflow so we can say which one.
What should I do about a burning smell?
Stop using the dryer until we look at it. Lint around the heater box or a worn belt rubbing the drum are likely causes, and both are fixable.
Does a weak vent at the outside wall matter?
Yes. It means the air is not leaving, so the dryer overheats and wastes time. We clear the line and check for crushed or long runs.
Book repair for your FAQE7077K
Book online in about a minute, or give us a call. Same-day appointments are available inside the Loop on most days, and next-day service across the rest of Houston.