Booking today · Houston arrival windows 9–12 · 1–4 · 4–7 Independent Frigidaire specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 844-8518 Schedule a Repair
Error code · Refrigerator

Frigidaire Fresh Food Display SH Points to a Shorted Sensor

SH shown in the fresh food display of a Frigidaire Gallery or Professional French-door bottom-freezer refrigerator with an electronic display means the fresh food sensor reads as shorted. The same code appears on electronic side-by-side models,…

Medium · inspection needed
Schedule a Repair(713) 844-8518
Code
SH (Refrigerator Display)
Appliance
Refrigerator
Brand
Frigidaire
Warranty
30-day workmanship

What SH (Refrigerator Display) means

SH shown in the fresh food display of a Frigidaire Gallery or Professional French-door bottom-freezer refrigerator with an electronic display means the fresh food sensor reads as shorted. The same code appears on electronic side-by-side models, and older side-by-sides show a 3 in the fresh food window. A shorted sensor gives the control a signal it cannot trust, so cooling in the fresh food section may run too long or not enough. You may find frozen milk and produce, or a section that stays warm.

Common causes of SH (Refrigerator Display)

  • The fresh food temperature sensor
  • The wiring and connector between the sensor and the control
  • The board input for that sensor
✓ One safe check you can try

1. Close the doors firmly and check that nothing props them open. 2. Check the fresh food section for frozen items and move them away from the vents. 3. Pack milk and meat into a cooler if the section feels warm. 4. Do not remove panels.

! Why to stop there
  • We cannot tell from SH which part of the sensor circuit is shorted.
  • We test the sensor, look at the connector and check the control input.
  • The price is in writing before any work starts.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Refrigerator codes

EFFrigidaire Side-by-Side Display EF Means an Evaporator Fan Failure Er CEFrigidaire Four-Door Refrigerator Code Er CE: Service Needed Er T1 - Er T6Frigidaire Four-Door Codes Er T1 Through Er T6: Sensor Service Needed H / HIFrigidaire Refrigerator H and HI: High Temperature Alert OP (Freezer Display)Frigidaire Freezer Display Reading OP: An Open Sensor OP (Refrigerator Display)Frigidaire Fresh Food Display OP and an Open Sensor Circuit PFFrigidaire Refrigerator Code PF: Power Failure Indicator SBFrigidaire Refrigerator Showing Sb While Sabbath Mode Is On
SH (Refrigerator Display)SH (Refrigerator Display) questions
What does SH mean in the refrigerator display?

It means the control sees the fresh food sensor as shorted, so it has no usable temperature for that section. Service is needed to find the cause.

Is the problem the control board?

Not necessarily. A shorted reading can come from the sensor, its wiring or the board input. We test in that order and replace only what the test supports.

Should I repair or replace an older French-door refrigerator?

Often a repair makes sense, because a sensor is a modest part. We quote the work in writing and speak up if the repair is not worth it.

Book a visit

Still seeing SH (Refrigerator Display)?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 844-8518
☎ Call our office ▤ Schedule a Repair