Error code · Refrigerator

Frigidaire Four-Door Codes Er T1 Through Er T6: Sensor Service Needed

Medium · inspection needed

Code: Er T1 - Er T6
Appliance: Refrigerator
Brand: Frigidaire
Warranty: 30-day workmanship

What Er T1 - Er T6 means

Frigidaire four-door refrigerators, such as the FG4H2272UF and PRMC2285AF, can show an error between Er T1 and Er T6. The manufacturer lists the range as one entry and says only that service is needed. The T in the code suggests a temperature sensor, but the individual sensors are not named, so we do not guess which one yours is. The refrigerator may keep cooling, but cooling in one area can be uneven, and the display may keep the error until the sensor circuit is checked.

Common causes of Er T1 - Er T6

A temperature sensor or its connector in one of the compartments
The wiring that carries the sensor signal to the control
The control board input for that sensor

✓ One safe check you can try

1. Write down the exact code, such as Er T3, so we can use it. 2. Close every door firmly and wipe the door gaskets. 3. Check food temperatures by feel and move food if it is warming. 4. Call us and describe what you see.

! Why to stop there

The range of codes does not tell us which sensor is involved, so we find out by testing.
We read the sensors and the connectors, then check the control input.
Replacement of any part waits until you have approved a written price.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Refrigerator codes

H / HIFrigidaire Refrigerator H and HI: High Temperature Alert OP (Freezer Display)Frigidaire Freezer Display Reading OP: An Open Sensor OP (Refrigerator Display)Frigidaire Fresh Food Display OP and an Open Sensor Circuit PFFrigidaire Refrigerator Code PF: Power Failure Indicator SBFrigidaire Refrigerator Showing Sb While Sabbath Mode Is On SH (Freezer Display)Frigidaire Freezer Display Reading SH for a Shorted Sensor SH (Refrigerator Display)Frigidaire Fresh Food Display SH Points to a Shorted Sensor SY CEFrigidaire Code SY CE: Communication Lost While Running

Er T1 - Er T6Er T1 - Er T6 questions

Does the number after T matter?

Yes. Er T1 through Er T6 each point to a different spot in the cooling system. The manufacturer does not publish which is which, so we write down your code and test the sensors.

Will the refrigerator keep working?

Often it keeps cooling, but not always evenly. Watch the food and use a thermometer if you can. If the refrigerator warms up, move food to another one.

Is a four-door refrigerator worth repairing?

Often it is, because a sensor repair usually costs much less than replacement. We put the price in writing and say so if the unit is better replaced.

Book a visit

Still seeing Er T1 - Er T6?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 844-8518