FAQG7001N
Frigidaire FAQG7001N Gas Dryer Repair
Most common issues on this model
- Drum that spins but the burner stays off
- Gas smell or a new hiss near the connector
- Dryer that runs hot and shuts off early
- Wet clothes after a full cycle
The FAQG7001N is an Affinity 7.0 cubic foot gas dryer in Classic White. If yours says FAQG7001NW, it is the same dryer. It is an older model that we still see in many homes, and we repair it when a repair is practical.
Gas dryers are usually set up in a garage, a utility closet or a laundry room with a flexible gas connector and a vent to the outside. If you notice a gas smell, close the shutoff valve and call your utility first. For a dryer that runs hot and shuts off early, we test the thermal cutoffs and look at the vent, since heat that cannot escape trips them. Wet clothes after a long cycle lead us to the burner, the igniter and the airflow.
Burner parts differ between revisions, so the data label gets read in full before an order. You see a written estimate first, and we guarantee the labor for 30 days.
Key features
- Affinity gas dryer
- 7.0 cu. ft. capacity
- Classic White finish
- Also sold as FAQG7001NW
Error codes this model can show
My dryer spins but the burner never lights. What do you check?
We start with the gas supply, then the igniter and the valve coils. A glowing igniter with no flame points to the valve, and a dim igniter points to the igniter itself.
Why does the dryer shut off while it is hot?
A thermal cutoff trips when heat builds up, often from a blocked vent. We clear the airflow and test the cutoff and the high-limit parts before replacing anything.
Should I be concerned about a hiss near the gas connector?
Yes. Shut the gas valve, ventilate and call your gas company. We inspect the dryer after the line is safe, including the connector and the valve.
Book repair for your FAQG7001N
Book online in about a minute, or give us a call. Same-day appointments are available inside the Loop on most days, and next-day service across the rest of Houston.