Error code · Washer

Frigidaire Affinity Washer Code E91: Selector Lights Stay Dark

E91 on a Frigidaire Affinity 6000 or 7000 front-load washer means the selector LEDs do not light up. The selector is the knob and its ring of indicator lights that show the chosen cycle. The code…

Low risk · DIY check OK

(713) 844-8518

Code: E91
Appliance: Washer
Brand: Frigidaire
Warranty: 30-day workmanship

What E91 means

E91 on a Frigidaire Affinity 6000 or 7000 front-load washer means the selector LEDs do not light up. The selector is the knob and its ring of indicator lights that show the chosen cycle. The code is listed for the 2006 washers and for the 3.5 cu ft Affinity washers of about 2009 to 2012, not for the earlier 3.0 cu ft design. Owners see a washer that seems to have power but with no cycle lights around the knob, and E91 may show on the display. It is a console circuit condition.

Common causes of E91

Selector LED circuit on the console board
Connection between the selector and the control
Selector knob contacts wearing out

✓ One safe check you can try

1. Turn the washer off, then on, and turn the selector knob a few positions. 2. Check that the power cord is firmly plugged in. 3. Try starting a short cycle to see if it still runs. 4. If E91 returns, call us.

! Why to stop there

Dark selector lights could mean a console board problem, a loose connection or a worn selector.
We check the selector and its connection first, then the board, and give you a written price before replacing a panel.
We tell you if the age of the washer makes a new panel unreasonable.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

F2Frigidaire Washer Code F2: Too Much or Wrong Soap LED flash-count codes (non-display models)Frigidaire Gallery Washer Without a Display: Reading Codes from Blinking Lights LOCFrigidaire Front-Load Washer Display LOC: Control Lock Is on EB1Frigidaire Front-Load Washer Code EB1: Power Frequency Out of Range EB2Frigidaire Front-Load Washer Code EB2: Line Voltage Above 130 Volts EB3Frigidaire Front-Load Washer Code EB3: Line Voltage Under 90 Volts EF1Frigidaire Front-Load Washer Code EF1: Clogged Drain Pump EF2Frigidaire Front-Load Washer Code EF2: Too Much Soap

E91E91 questions

My washer still runs but the lights are out. Is that E91?

It can be. E91 means the selector LEDs do not light up. The washer may still run, but without lights it is hard to know what cycle it is on.

Can I replace a bulb myself?

The selector uses LEDs on a circuit board, not a bulb you can swap. We test the board and give you a written price. We test the board and give you a written price rather than leave you guessing.

Is E91 urgent?

Not usually. It is a console issue rather than a water or heat problem. We would still have it checked, since panel circuits can get worse.

Book a visit

Still unsure about E91?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 844-8518