Error code · Washer

Frigidaire Front-Load Washer Code E67: Wrong Voltage at the Microprocessor

High · stop use, call now

Code: E67
Appliance: Washer
Brand: Frigidaire
Warranty: 30-day workmanship

What E67 means

E67 on a Frigidaire front-load washer means the input voltage at the microprocessor is incorrect. The microprocessor is the small brain on the control board, and it needs a steady supply to work. The code is used on the horizontal-axis electronic control from the Frigidaire and Gallery 3.0 cu ft washers through the Affinity 6000 and 7000 series. When the supply to the processor drifts, the control stops rather than risk wrong decisions. Owners see a washer that stops, resets or refuses to start with E67 shown. It is a control power condition.

Common causes of E67

Power supply section of the control board
Weak or loose power connection to the washer
Aging capacitors or solder joints on the board

✓ One safe check you can try

1. Check that the washer is plugged in firmly and nothing else shares the outlet. 2. Turn the washer off, then on, and try a short cycle. 3. Look at the cord for heat marks or damage, and stop if you find any. 4. If E67 returns, leave the washer off and call us.

! Why to stop there

E67 says the processor supply is wrong, but the cause could be the outlet, the cord or the board itself.
We check the outlet and incoming power, then the control board supply, and give you a written price before replacing it.
Older boards can be expensive, so we tell you plainly if it is worth fixing.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

F2Frigidaire Washer Code F2: Too Much or Wrong Soap LED flash-count codes (non-display models)Frigidaire Gallery Washer Without a Display: Reading Codes from Blinking Lights LOCFrigidaire Front-Load Washer Display LOC: Control Lock Is on E98Frigidaire Affinity Washer Code E98: Panel Circuit Problem Detected EBEFrigidaire Affinity Washer Code EBE: Console Control Flag EBFFrigidaire Affinity Washer Code EBF: Console Control Warning EB1Frigidaire Front-Load Washer Code EB1: Power Frequency Out of Range EB2Frigidaire Front-Load Washer Code EB2: Line Voltage Above 130 Volts

E67E67 questions

Is E67 a power company problem?

Sometimes line power plays a part, but E67 is about the voltage at the processor on the board. We check the outlet and the board to tell them apart.

Is it safe to keep using the washer?

If the display resets or the code returns, we would stop. A weak supply can make a control behave unpredictably. A weak or unstable supply can leave the board confused, so we would rather test it than let it keep running.

What does a new control cost?

We do not quote by phone. We confirm the problem on site and give you a written price before any part is ordered. That price depends on whether it is the outlet, the cord or the board itself, which we only know after testing.

Book a visit

Still seeing E67?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 844-8518