Error code · Washer

Frigidaire Gallery Washer Code E55: Motor Overheating

On the Frigidaire and Gallery 3.0 cu ft front-load washers of roughly 2004 to 2006, E55 means the motor is overheating. The washer stops the motor when it gets too hot, and the cycle halts. On…

Medium · inspection needed

(713) 844-8518

Code: E55
Appliance: Washer
Brand: Frigidaire
Warranty: 30-day workmanship

What E55 means

On the Frigidaire and Gallery 3.0 cu ft front-load washers of roughly 2004 to 2006, E55 means the motor is overheating. The washer stops the motor when it gets too hot, and the cycle halts. On the lower-tier models without a display, the same condition is shown as light flashes instead of a printed code. E55 appears in that early chart only, so it does not apply to the later Affinity washers. Owners usually see it after a long run, a heavy load or repeated back-to-back loads.

Common causes of E55

Motor running hot after a heavy or repeated load
Drum or load binding so the motor works harder
Motor protection circuit reading hot
Control reading of motor temperature

✓ One safe check you can try

1. Turn the washer off and let the motor cool for 30 minutes. 2. Take out part of the load and make sure nothing is jammed between the drum and the tub. 3. Restart with a smaller load. 4. If E55 comes back quickly, stop using the washer and book a visit.

! Why to stop there

If the motor cools and E55 returns soon after, we do not know whether the motor, a drag in the drum or the temperature circuit is the cause.
We check how freely the drum turns and how the motor behaves under load, then give you a written price.
These washers are older, and we tell you straight whether a repair makes sense.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

F2Frigidaire Washer Code F2: Too Much or Wrong Soap LED flash-count codes (non-display models)Frigidaire Gallery Washer Without a Display: Reading Codes from Blinking Lights LOCFrigidaire Front-Load Washer Display LOC: Control Lock Is on E98Frigidaire Affinity Washer Code E98: Panel Circuit Problem Detected EBEFrigidaire Affinity Washer Code EBE: Console Control Flag EBFFrigidaire Affinity Washer Code EBF: Console Control Warning EB1Frigidaire Front-Load Washer Code EB1: Power Frequency Out of Range EB2Frigidaire Front-Load Washer Code EB2: Line Voltage Above 130 Volts

E55E55 questions

Is it safe to wait and try again?

Yes. Give the motor 30 minutes to cool, then try a smaller load. If it overheats again soon, it needs a look rather than repeated restarts.

Does my washer show E55 with lights instead?

Some Good-line models without a display show codes by flashing the indicator lights, with the Start light giving the second digit. We can read that pattern when we visit.

Could a heavy load cause E55?

It can. A heavy load makes the motor work harder and heat up. If E55 shows up on ordinary loads, we check the drum and the motor.

Book a visit

Still seeing E55?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 844-8518