Error code · Range

Frigidaire Microwave Combination Code F80: Display and Microwave Board Not Talking

Medium · inspection needed

Code: F80
Appliance: Range
Brand: Frigidaire
Warranty: 30-day workmanship

What F80 means

On Frigidaire range and wall-oven combinations that include a microwave, F80 means the user interface, the touch panel you use, has lost communication with the microwave control board. The oven section may carry on while the microwave side stops. You may see F80 on the display, keys that no longer start the microwave, or a microwave that never responds to a start press.

Common causes of F80

The cable between the user interface and the microwave control board
The microwave control board
The user interface itself
Loose connectors from heat and vibration

✓ One safe check you can try

1. Turn the microwave off. 2. Cut power at the plug or breaker for up to 30 seconds, then restore it. 3. Press start on the microwave again and see whether the code returns. 4. Leave the housing closed, and see whether the oven section below still heats.

! Why to stop there

F80 tells us two boards are not talking, not which one stopped.
We test the cable and connectors, then each board's supply.
A written price comes first, and an honest word on whether an older combination is worth the repair.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

F93Frigidaire Range F93: Door Lock Took Too Long F94Frigidaire Range Code F94: Too Many Door Lock Attempts F95Frigidaire Slide-In Range F95: Door Motor Will Not Stop LockFrigidaire Oven Message "Lock": Oven Lock Is On Sb (showroom)Frigidaire Range Code Sb: Showroom Mode F90Frigidaire Range F90 Error: Door Unlock Took Too Long F91F91 on a Frigidaire Range: Too Many Unlock Attempts F92Frigidaire Range Code F92: Oven Door Left Open Too Long

F80F80 questions

Does F80 affect the oven too?

Not necessarily. The code concerns the microwave side of the combination. We test the oven separately, so you know whether you can still cook while the microwave is out.

Can a reset clear F80?

It can clear a one-time drop in communication. If F80 returns, the link between the touch panel and the microwave board needs testing, and we begin with the cable.

Is an older combination unit worth repairing?

Often a cable or connector is, and we say plainly if it is not. You see a written price first, so you can weigh the repair against the age of the unit.

Book a visit

Still seeing F80?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 844-8518