Error code · Range

Frigidaire Slide-In Range F62: Zero-Cross Signal Missing

Medium · inspection needed

Code: F62
Appliance: Range
Brand: Frigidaire
Warranty: 30-day workmanship

What F62 means

On Frigidaire Gallery and Professional electric slide-in ranges from 2009, such as the FGES3045KW, FGES3065KB, FGES3075KF and FPES3085KF, F62 means the control is missing its zero-cross signal, a timing pulse from the incoming power. On later controls, F62 and F63 together report an internal signal voltage error, which shows up as a display communication error. You may see F62 at power-up with the oven not starting or the display behaving strangely.

Common causes of F62

The electronic oven control and its timing circuit
The display link to the control
The power supply feeding the control
Connections that have loosened

✓ One safe check you can try

1. Turn the range off and give it a moment. 2. Cut power at the plug or breaker for 30 seconds, then restore it. 3. Check whether F62 returns at power-up, or only after the oven has been used. 4. Leave the control panel closed and the wiring untouched.

! Why to stop there

F62 points to the control's own timing, which an owner cannot check from outside.
We test the supply and the display link, then judge the control.
You get a written price first, and a plain answer if the age of the range makes a new control a poor value.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

F93Frigidaire Range F93: Door Lock Took Too Long F94Frigidaire Range Code F94: Too Many Door Lock Attempts F95Frigidaire Slide-In Range F95: Door Motor Will Not Stop LockFrigidaire Oven Message "Lock": Oven Lock Is On Sb (showroom)Frigidaire Range Code Sb: Showroom Mode F68 / F69Frigidaire Range Codes F68 and F69: High Voltage at the Range F7 10 / 20 / 30 / 40Frigidaire Electric Range F7 10, 20, 30 and 40: Open Surface Knob Circuit F7 11 / 21 / 31 / 41Frigidaire Range Codes F7 11, 21, 31 and 41: Shorted Surface Knob Circuit

F62F62 questions

What is a zero-cross signal?

It is a timing pulse from the incoming power that the control uses to switch cleanly. When it is missing, the control cannot run properly and shows F62 until the signal returns or the control is checked.

Is F62 related to F63?

On later controls they are grouped together as an internal signal voltage error. We read both the same way and test the display link and the supply first, then the control.

Does a reset help with F62?

It may clear a glitch. If F62 returns, the control's timing is the likely issue, and we test it before recommending a replacement, with a written price given first.

Book a visit

Still seeing F62?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 844-8518