Error code · Range

Frigidaire Range F10 Error: Runaway Oven Temperature

High · stop use, call now

Code: F10
Appliance: Range
Brand: Frigidaire
Warranty: 30-day workmanship

What F10 means

On Frigidaire electric ranges and cooktops, F10 means the electronic oven control sensed what could be a runaway oven, a temperature climbing when it should not. The control looks for this when a relay is stuck closed or the oven sensor reads wrong, and it shuts the oven down to protect the range. Current models and freestanding gas and electric ranges built since about 2004 use the code. You will see F10 on the display and the oven stops heating or stays hot after you cancel.

Common causes of F10

The oven temperature sensor and its wiring
A relay that stays closed and keeps feeding the element
The electronic oven control reading the sensor
Heat from a cooktop or blocked venting reaching the control

✓ One safe check you can try

1. Turn the oven off and crack the door open to let heat out. 2. Flip the breaker off or unplug the range for up to 30 seconds, then turn it on again. 3. If the oven starts overheating again, leave the power off and call us. 4. On a gas range, if you ever smell gas, get out of the house and call the gas utility from outside.

! Why to stop there

Resetting power clears the message, but not a relay or sensor that is misbehaving.
We compare the sensor reading with the real oven temperature and test the relay that switches the heat.
We give you a written price first, and we do not leave an overheating oven running.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

F93Frigidaire Range F93: Door Lock Took Too Long F94Frigidaire Range Code F94: Too Many Door Lock Attempts F95Frigidaire Slide-In Range F95: Door Motor Will Not Stop LockFrigidaire Oven Message "Lock": Oven Lock Is On Sb (showroom)Frigidaire Range Code Sb: Showroom Mode F66Frigidaire Range Code F66: Control Power Supply Failure F68 / F69Frigidaire Range Codes F68 and F69: High Voltage at the Range F7 10 / 20 / 30 / 40Frigidaire Electric Range F7 10, 20, 30 and 40: Open Surface Knob Circuit

F10F10 questions

Is F10 dangerous?

It is a protective shutdown. The control saw a possible runaway temperature, so keep the oven off until we have checked it. If the oven keeps heating after you cancel, cut the power at the breaker.

Can a bad sensor cause F10?

Yes. A sensor that reads wrong can tell the control the oven is hotter than it is. A stuck relay can also do it, so we test both before we replace anything.

Do you work on older ranges with F10?

Yes. You will find older ranges with this control all over Houston, and we work on them regularly. We say plainly when a repair does not make sense.

Book a visit

Still seeing F10?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 844-8518