Booking today · Houston arrival windows 9–12 · 1–4 · 4–7 Independent Frigidaire specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 844-8518 Schedule a Repair
Model library · Frigidaire Cooktop

FGGC3047QS

Frigidaire FGGC3047QS Gas Cooktop Repair

Frigidaire cooktop

Most common issues on this model

  1. Center burner that lights unevenly or sounds loud
  2. Any of the five burners that clicks without catching
  3. Express-Select knobs that stop turning smoothly
  4. Gas valve and supply connection under the cooktop

The FGGC3047QS is a Gallery 30-inch gas cooktop with five sealed burners, continuous cast-iron grates and Express-Select knobs. The center burner is rated at 18,000 BTU, which makes it the one most owners use for large pots and woks.

With five burners in a 30-inch width, the burners sit close together and a spill on one can reach its neighbor. We start with the center burner when the complaint is a weak or roaring flame, because its port pattern clogs differently than the smaller ones. Then we test each igniter and the spark module, and turn the knobs to see whether the valve stems move freely.

Cooktops of this size are often set in an island or a long counter run, so we also check the gas fitting and the clearance underneath before we leave. We confirm the exact model with the label, quote the repair, and wait for your approval before starting.

Key features

  • 30-inch gas cooktop with 5 sealed burners
  • Gallery line
  • Continuous cast-iron grates
  • Express-Select control knobs
  • 18,000 BTU center burner
FGGC3047QSFGGC3047QS questions
Why is my center burner flame so uneven?

Spills can block the ports around the large burner and leave a patchy flame. We remove the cap, clean the ports and relight. If the flame is still wrong, we inspect the burner base and the gas flow.

Only one of the five burners will not light. Is the whole cooktop bad?

Usually not. A single burner points to its own igniter, port or valve rather than the spark module for all five. We test that burner first so you are not quoted for parts that work.

Are Express-Select knobs hard to replace?

The knobs slide onto the valve stem, but a worn stem or a bent valve can make them stick. We check the stem, then quote the knob or valve you actually need.

Book a visit

Book repair for your FGGC3047QS

Book online in about a minute, or give us a call. Same-day appointments are available inside the Loop on most days, and next-day service across the rest of Houston.

☎ Call our office ▤ Schedule a Repair